Updating bios asus ez flash Horney chat cites
Put the update on a USB stick, select "EZ Flash" or "Easy Flash" from the UEFI boot menu and do the update from within this program.
(some might not be releated to the task you are trying to accomplish).
Install a working BIOS via EZ Flash or AFUDOS and then put the 2nd DIMM back in (after switching off). SLanguage=en-us&model=A8V Deluxe Apparently the problem is that the BIOS on the support CD is too old to run certain newer CPUs in dual-channel mode, that's why removing one of the DIMMs helps (sometimes).
How do you flash the bios when the floppy drive wont work because I cannot get into the Bios menus could I use a cdrom to flash the bios. I have all the updates from the Asus Website ready to update the bios for my AMD 3700 SAN DIEGO 939 socket Cpu. Boot up the computer with the CD in, Press Alt F2 during the Bios POST. (other status messages will follow until completion) 5. Do not use the win based flash utility, BIOS should not be flashed from a windows enviroment. i only stuffed up my flash this very evening, and miraculously google led me to your words of wisdom written merely days earlier let me add that if you possess the original a8v cd that comes with the mobo, you can boot with it in the cd whilst pressing alt f2 and the miracle of rebirth is yours by just sitting back and marvelling.....
The BIOS and DEVICE DRIVERS contained here are exclusively for Micro-Star products only.
Micro-Star assumes no responsibility for any damages resulting from improper use or lack of technical expertise.
You then need to run the update utility and point it to the update it should apply.
The difficult part may be to find out in which drive or directory the tool and update reside.
Thought I would document my BIOS flashing story in the hopes that it could help someone who's having a panic attack because their system won't POST. Erasing the CMOS as part of a BIOs flash is not documented in the manual. I downloaded both the correct BIOS file and the windows 7 utility tool and now need to boot Free DOS to run, however, I've tried every method out there and they all fail (or so I think): Short answer: Read the manual (page A-12).This product, like others, has an integrated update functionality.Worked for me and I have seen several other positive posts. If you have the support CD Rom that came with the motherboard look in the root of the disk using explorer or whatever. I'm not exactly sure why it worked, but it's a relatively simple solution and well worth a shot.
BTW, When I flash with from DOS it works just fine. BTW, this is completely inexcusable on the part of Asus. I then erased the CMOS RTC RAM data using a jumper on the mother board. I shut it down, reset the jumper and booted up again with no problem.
The update i download as 1017 Cannot find EZ-Flash only AWDFLASF116 I've tried taking out the bios battery - No Luck Clearing the Cmos - No Luck Taking out the one stick of Ram - No Luck Could I use a USB PEN as a floppy disk with the updates..? BIOS file will load automatically, and tell you to reboot when it's completed. The most reliable flash procedure for the majority of ASUS boards is "AFUDOS" via a bootable floppy. but not documented ANYWHERE in the relevant section of the manual i also took out some of the ram (single stick left in dimm b1 (third slot from the processor), but i have no idea if that helped i had originally "upgraded" (ha!